‘Ctrl+F’로 에러 메시지 번호를 검색하시면 문제 발생 원인과 해결 방법을 빠르게 확인하실 수 있습니다.

---

Tibero Error Message 29000~29999

29001: Lock failed (op: %1$s, step: %2$s, lock: %3$s, ec: %4$d).
Cause: The lock operation failed.
Action: Locate the cause of the failure and try again.

29002: Unlock failed (op: %1$s, step: %2$s, ec: %3$d).
Cause: The unlock operation failed.
Action: Locate the cause of the failure and try again.

29003: Failed to connect to CM (Cluster Manager).
Cause: Failed to connect to CM.
Action: Verify that the CM connections settings (e.g. IP address and port number) in [database sid].tip file are valid.

29004: The INC message buffer size is too small (current_size: %1$d, required_size: %2$d).
Cause: The INC message buffer size is too small.
Action: Increase the INC message buffer size (_INC_BUF_MSG_SIZE).

---

Tibero Error Message 30000~30999

30001: The diskspace, “%1$s”, does not exist or has not been mounted.
Cause: The diskspace does not exist, or has not been mounted to the current TAS instance.
Action: Check that the diskspace name is correct, the diskspace exists, and the diskspace has been mounted to the current TAS instance.

30002: The TAS disk, “%1$s”, does not exist.
Cause: The TAS disk is not found.
Action: Check the TAS disk name.

30003: The failure group, “%1$s”, does not exist in the diskspace, “%2$s”.
Cause: The name does not match the failure group name of the disks in the diskspace.
Action: Check the failure group name.

30004: The TAS file, ‘%1$s’, does not exist.
Cause: The TAS file is not found.
Action: Check the TAS file name.

30005: The disk path ‘%1$s’ does not exist among the discovered disks.
Cause: The disk path does not exist among the disks discovered by the TAS instance.
Action: Enter a disk path discovered by using the TAS_DISKSTRING parameter, or check the TAS_DISKSTRING parameter.

30006: Cannot create the diskspace.
Cause: Cannot create the given diskspace.
Action: For more information, refer to the logs.

30007: The maximum number of disks that can be used is %1$d.
Cause: The diskspace is already using the maximum number of disks.
Action: Drop existing disk(s) from the diskspace or create a new diskspace.

30008: Cannot open the disk, ‘%1$s’.
Cause: Cannot open the given disk.
Action: For more information, refer to the logs.

30009: The disk, ‘%1$s’, has already been mounted.
Cause: An attempt was made to add a disk, which is from another diskspace mounted on the current instance, to the diskspace.
Action: Use another disk. Unless the diskspace of the disk is unmounted, the FORCE option has no effect.

30010: The diskspace name, “%1$s”, is already being used by another diskspace.
Cause: The name specified with CREATE DISKSPACE is already being used by another diskspace.
Action: Select another name.

30011: The size of the disk, ‘%1$s’, is smaller than %2$d MB.
Cause: The disk size is too small to add the disk to the diskspace.
Action: Check if the system settings are correct.

30012: Failed to remove the diskspace, ‘%1$s’.
Cause: Failed to remove the diskspace.
Action: For more information, refer to the logs.

30013: The diskspace has not been mounted.
Cause: TAS was booted without creating a diskspace.
Action: After booting TAS in nomount mode, create a diskspace and then reboot the TAS.

30014: The path, ‘%1$s’, is invalid.
Cause: The path prefix (+) or path delimiter (/) is not valid.
Action: Check the path character array.

30015: The name, ‘%1$s’, is too long.
Cause: The TAS disk path is too long.
Action: Specify a TAS disk path of 256 characters or less.

30016: Failed to write the disk header.
Cause: Failed to open the disk, perform disk I/O, or the magic value does not match.
Action: For more information, refer to the logs.

30017: Failed to add the disk.
Cause: Failed to add the disk.
Action: Check the tracelog to fix the problem and then try again.

30018: Failed to remove the disk.
Cause: Failed to drop the disk.
Action: Check the tracelog to fix the problem and then try again.

30019: Failed to create the file, ‘%1$s’.
Cause: Failed to create the file.
Action: Check the tracelog to fix the problem and then try again.

30020: Failed to delete the file, ‘%1$s’.
Cause: Failed to delete the file.
Action: Check the tracelog to fix the problem and then try again.

30021: Failed to change the file size.
Cause: Failed to change the file size.
Action: Check the tracelog to fix the problem and then try again.

30022: Failed to connect to the local port.
Cause: Failed to connect to the IP address and port.
Action: Check that the specified port is not already occupied and then try again.

30023: Unknown network I/O error (TAS).
Cause: Unknown network error has occurred.
Action: Check that the network equipment is operating normally and then try again.

30024: A general TAS error occurred.
Cause: A TAS internal error occurred.
Action: Contact the technical support team.

30025: The disk size entered, %1$u MB, is larger than the actual disk size of %2$u MB.
Cause: The disk size entered is larger than the actual disk size.
Action: Enter a valid size.

30026: The disk name ‘%1$s’ is already in use.
Cause: The specified name is already in use.
Action: Enter another disk name.

30027: The disk path ‘%1$s’ was entered multiple times.
Cause: The specified path was entered multiple times.
Action: The disk path can only be entered once.

30028: The file path ‘%1$s’ does not exist on the disk space ‘%2$s’.
Cause: The disk space specified in ‘%1$s’ does not match that specified in the DDL statement.
Action: Set a valid disk space.

30029: The disk size is not entered.
Cause: The character device size must be entered.
Action: Enter a valid size.

30030: Cannot allocate space from an offline disk.
Cause: One or more disks are offline.
Action: Remove the offline disks or bring them online.

30031: The entered user name ‘%1$s’ does not exist.
Cause: Attempted to execute a command for a TAS user that does not exist.
Action: Use an existing TAS user name, or add a new TAS user.

30032: The user name ‘%1$s’ already exists.
Cause: Attempted to use a name that is a duplicate of an existing TAS user.
Action: Create a new unique TAS user name.

30033: The entered group name ‘%1$s’ does not exist.
Cause: Attempted to execute a command for a TAS group that does not exist.
Action: Use an existing TAS group name, or add a new TAS group.

30034: The group name ‘%1$s’ already exists.
Cause: Attempted to use a name that is a duplicate of an existing name.
Action: Create a new unique TAS group name.

30035: Specified diskspace ‘%1$s’ is not the master diskspace.
Cause: An attempt was made to execute a command on a diskspace that is not the master diskspace.
Action: Execute the command on the master diskspace.

---

Tibero Error Message 60000~60999

60001: Internal error occurred at %1$s:%2$d.
Cause: An internal error occurred.
Action: Contact the technical support team.

60002: Invalid command. Enter HELP or HELP .
Cause: Invalid command.
Action: Verify the command is correct.

60003: Unterminated string.
Cause: The string is not terminated.
Action: Check that quotation marks are used correctly.

60004: Integer value is out of range (%1$d..%2$d).
Cause: The integer value is out of range.
Action: Specify a number within the range.

60005: Column type does not match.
Cause: Column type does not match.
Action: Check the column type.

60006: No modifications to be saved.
Cause: Nothing was modified, so no changes will be saved.
Action: Use the command after performing other commands more than once.

60007: Command buffer is empty.
Cause: Command buffer is empty.
Action: Execute an arbitrary command and then retry.

60008: Identifier is too long.
Cause: The identifier length exceeds the maximum allowed.
Action: Ensure the identifier contains less than 129 bytes.

60009: Foreign key does not match.
Cause: The foreign key or a primary key of the referenced table does not match.
Action: Match the constraints between the two tables.

60010: External API error: %1$s.
Cause: Failed to execute external library function.
Action: Check the error message.

60011: String value is out of range (<= %1$d bytes).
Cause: The string value exceeded the maximum length allowed.
Action: Specify a string within the range.

60012: Generic I/O error.
Cause: An I/O error occurred during communication with other process.
Action: Contact the technical support team.

60013: Parameter syntax error: %1$s.
Cause: Syntax error occurred.
Action: Check the error message.

60014: License error: %1$s.
Cause: License check failed.
Action: Check the error message.

60015: The manager process already exists.
Cause: The manager process already exists.
Action: Terminate the manager process or check whether the .proc.mgr file exists.

60016: The manager process already attached.
Cause: The manager process already attached.
Action: Use DETACH command first.

60017: The mandatory parameter ‘%1$s’ is missing.
Cause: A mandatory parameter must be defined.
Action: Check the parameter file.

60018: The topology identifier ‘%1$s’ already exists.
Cause: The topology identifier is already in use.
Action: Use another topology identifier.

60019: Unable to open a connection.
Cause: The maximum number of connections are already open.
Action: Close the other open connections, or shut down the process, and restart the process.

60020: The process ‘%1$s’ already exists.
Cause: The requested process already exists.
Action: Terminate the process first.

60100: Invalid option ‘%1$s’.
Cause: Invalid option.
Action: Verify the option is correct.

60101: Invalid time value.
Cause: Time value is invalid or does not match the format.
Action: Check the time value or check that the value matches the TIMEFORMAT parameter.

60102: Invalid time format.
Cause: Invalid time format.
Action: Refer to the SQL Reference Guide to check that the format is valid.

60103: Unable to handle unexpected incoming message type %1$d.
Cause: An unexpected protocol was received.
Action: Check that the protocol is from a valid context.

60104: The directory ‘%1$s’ is invalid.
Cause: The directory must be an absolute path.
Action: Check the directory.

60105: Invalid parameter ‘%1$s’: %2$s.
Cause: Invalid parameter.
Action: Check the error message.

60106: Wallet is already open.
Cause: The wallet is already open.
Action: Proceed to the step following the opening of the wallet.

60200: Failed to create the directory ‘%1$s’: %2$s.
Cause: Failed to create directory.
Action: Check the error message.

60201: Failed to open the file ‘%1$s’: %2$s.
Cause: Failed to open file.
Action: Check the error message.

60202: Failed to execute shell command: %1$s.
Cause: Failed to execute shell command.
Action: Check the error message.

60203: Failed to create process: %1$s.
Cause: Failed to create process.
Action: Check the error message.

60204: Failed to create thread: %1$s.
Cause: Failed to create thread.
Action: Check the error message.

60205: Failed to create a thread key: %1$s.
Cause: Failed to create a thread key.
Action: Check the error message.

60206: Failed to create socket: %1$s.
Cause: Failed to create socket.
Action: Check the error message.

60207: Failed to create pipe: %1$s.
Cause: Failed to create pipe.
Action: Check the error message.

60208: Failed to allocate TLS structure (errno:%1$d).
Cause: Failed to allocate TLS structure.
Action: Check the error message.

60209: Failed to connect to the %1$s process.
Cause: Failed to connect to the process.
Action: Check the connection information or if the process is running.

60300: Not yet implemented.
Cause: This function has yet to be implemented.
Action: This function will be supported in the next version.

60301: Not connected to the process.
Cause: Not connected to the process or connection was lost.
Action: Verify there is an active connection to the process.

60302: Environment variable %1$s does not set.
Cause: Environment variable %1$s has not been defined.
Action: Define the variable.

60303: HELP for ‘%1$s’ does not exist.
Cause: There is no HELP for the subject.
Action: Try another subject.

60304: The manager process does not exist.
Cause: The manager process does not exist.
Action: Start the manager process first.

60305: Column ‘%1$s’ does not fit.
Cause: The column is too long to fit on the line.
Action: Lengthen the line or shorten the column.

60306: Numeric column was not found.
Cause: Failed to find numeric column in the given table.
Action: Verify the primary key or the entire column.

60307: Primary key was not found.
Cause: Failed to find primary key in the given table.
Action: Verify the numeric column or the entire column.

60308: Node was not found.
Cause: Failed to find given node.
Action: Add a node and then execute.

60309: Parameter ‘%1$s’ was not found.
Cause: Failed to find the parameter.
Action: Verify the parameter exist.

60310: Unable to find the Topology ID.
Cause: Unable to fine the Topology ID in the topology map or running processes.
Action: Check the Topology ID.

60311: Unable to find the process.
Cause: Unable to fine the process that meets the specified condition in the topology map.
Action: Check the Topology ID or Process Number.

60312: Unable to find the ‘%1$s’ file.
Cause: Unable to find the rule config file.
Action: Check config directory.

60313: Wallet is not open.
Cause: Wallet is not yet open.
Action: Try again after opening the wallet.

60314: Port Number of ‘prs_top.map’ and ‘%1$s’ are not same.
Cause: Port Number of ‘prs_top.map’ and ‘%1$s’ are not same.
Action: Check the Port Number.

60400: Failed to verify: %1$s.
Cause: Failed to verify.
Action: Check the error message.

60401: Failed to push rows: %1$s.
Cause: Failed to push rows.
Action: Check the error message.

60402: Failed to encrypt a plaintext.
Cause: Failed to encrypt a plaintext.
Action: Contact the technical support team.

60403: Failed to decrypt a ciphertext.
Cause: Failed to decrypt a ciphertext.
Action: Contact the technical support team.

60404: Config parameter %1$s and %2$s are incompatible.
Cause: Incompatible options are used in .cfg file
Action: Check the config file.

60405: Failed to open wallet.
Cause: Failed to open wallet.
Action: Check the password, or request the security administrator to create a new wallet.

60406: Failed to cipher init.
Cause: Failed to cipher init.
Action: Contact the technical support team.

60407: Failed to cipher update.
Cause: Failed to cipher update.
Action: Contact the technical support team.

60408: All DCR min or max columns must have default value set
Cause: All DCR min or max columns must have default value set
Action: Set default value for the corresponding DCR column. Check the manual.

60409: read(‘%2$s’) failed — %1$s.
Cause: Failed to read the file.
Action: Check if the file can be accessed.

60410: stat(‘%2$s’) failed — %1$s.
Cause: Failed to read stat of the file.
Action: Check if the file can be accessed.

60411: Dead process ‘%1$s’ ‘%2$s’ ‘%3$d’ exists. Please shutdown the previous process.
Cause: Dead process exists.
Action: Check if previous process still exists.

60412: Event initialization failed.
Cause: Event initialization failed.
Action: Check logs of the process.

60413: Socket listen initialization failed.
Cause: Socket listen initialization failed.
Action: Check logs of the process.

60414: fetching tte global key from source database failed.
Cause: fetching tte global key from source database failed.
Action: checking _VT_TTE_GLOBAL_KEY view in source database and db connection.

---

Tibero Error Message 70000~70999

70001: SQL buffer is empty.
Cause: The SQL buffer is empty.
Action: Retry the command after executing a SQL statement multiple iterations.

70002: Failed to open the file ‘%1$s’: %2$s.
Cause: Failed to open the file.
Action: Check the file name and path.

70003: Invalid command. Enter HELP or HELP .
Cause: Invalid command.
Action: Verify the command is correct.

70004: Not connected to the server.
Cause: Not connected to the server or connection was lost.
Action: Verify there is an active connection to the server.

70005: Invalid object name ‘%1$s’.
Cause: An object with the specified name was not found.
Action: Verify the object name is correct.

70006: Invalid schema name ‘%1$s’.
Cause: The specified schema name does not exist.
Action: Verify the schema name is correct.

70007: Invalid parameter name.
Cause: The environment variable specified for SET statement does not exist.
Action: Verify the variable name is correct.

70008: Invalid integer value.
Cause: The integer value is invalid for a SET environment variable.
Action: Specify a positive integer value.

70009: Invalid string value.
Cause: The string value is invalid for a SET environment variable.
Action: Specify a string value smaller than 128.

70010: Parameter accepts only ON or OFF as values.
Cause: The parameter accepts only ON or OFF as a value.
Action: Make sure to use ON or OFF for the parameter.

70011: Invalid parameter value or type.
Cause: Invalid parameter value or type.
Action: Check the parameter value or type.

70012: Failed to set AUTOCOMMIT mode.
Cause: Failed to set AUTOCOMMIT mode.
Action: Ensure that the AUTOCOMMIT mode is correct.

70013: No modifications to be saved.
Cause: Nothing was modified, so no changes will be saved.
Action: Use the command after performing the SQL statement more than once.

70014: BLOB type cannot be displayed by SQL utility.
Cause: The SQL utility cannot display BLOB data.
Action: Check to see if it contains a BLOB type.

70016: New password and confirmation password do not match.
Cause: The password that was re-entered for confirmation does not match the new password.
Action: Ensure the confirmation password was typed correctly.

70017: Missing or invalid password.
Cause: The password is missing or invalid.
Action: Verify that the correct password was provided.

70018: Invalid AUTOTRACE mode.
Cause: Invalid AUTOTRACE mode.
Action: Verify the AUTOTRACE mode is correctly specified.

70019: Unable to describe invalid object.
Cause: Cannot describe an invalid object.
Action: Verify the object is valid.

70020: Specified object was not found.
Cause: The object does not exist.
Action: Verify that the object exists.

70021: Unable to set SERVEROUTPUT mode.
Cause: Failed to specify a SERVEROUTPUT environment variable.
Action: Verify the DBMS_OUTPUT package exists.

70022: Not yet implemented.
Cause: This function has yet to be implemented.
Action: This function will be supported in the next version.

70023: Unable to set AUTOTRACE mode.
Cause: Failed to specify an AUTOTRACE environment variable.
Action: Contact the technical support team.

70024: Invalid format ‘%1$s’.
Cause: Invalid format type.
Action: Refer to “SQL Reference Guide” to check the validity of the format.

70025: Password is too long.
Cause: The password must be less than or equal to 64 characters.
Action: Choose a new password.

70026: Filename is too long.
Cause: The file name must be less than or equal to 256 characters.
Action: Choose a new filename.

70027: Unable to execute shell command.
Cause: Cannot execute the shell command.
Action: Refer to “Administrator Guide” to check the validity of the shell command.

70028: Invalid shutdown mode.
Cause: Invalid shutdown mode.
Action: Refer to “Administrator Guide” to check the validity of the shutdown mode.

70029: Database name is too long.
Cause: The DB name must be less than or equal to 40 characters.
Action: Choose a new DB name.

70034: Stat table creation failed.
Cause: Failed to create a stat table.
Action: Check the user’s permissions for table creation.

70035: Unable to display plan: check PLUSTRACE role.
Cause: Failed to display the plan of the SQL statement.
Action: A PLUSTRACE role must be specified.

70036: Unable to gather statistics: check PLUSTRACE role.
Cause: Failed to display statistics.
Action: A PLUSTRACE role must be specified.

70037: Missing or invalid username.
Cause: The user name is missing or invalid.
Action: A user name must be at least one character long.

70038: Username is too long.
Cause: The user name must be less than or equal to 128 characters.
Action: Choose a new username..

70039: Number is invalid or out of range.
Cause: The number is invalid or not an integer.
Action: Use an integer that is within the allowed range.

70040: HELP for ‘%1$s’ does not exist.
Cause: There is no HELP for the subject.
Action: Try another subject.

70041: Invalid first or last line number.
Cause: The first or last line number is invalid.
Action: Check the line value.

70042: Internal error occurred ‘%1$s’.
Cause: An internal error occurred.
Action: Contact the technical support team.

70043: Undeclared variable ‘%1$s’.
Cause: Undeclared variable.
Action: Verify that the variable name is correct.

70044: Invalid type.
Cause: An invalid type was used.
Action: Refer to “SQL Reference Guide” to verify the validity of the type.

70045: Declared variable was not found.
Cause: The declared variable was not found.
Action: Declare the variable first.

70047: Input is too long.
Cause: The entered value must be less than or equal to 128 characters.
Action: Re-enter the input.

70048: Invalid bind parameter ‘%1$s’.
Cause: Invalid bind variable.
Action: Verify that the name or type of the bind variable is correct.

70050: Format value is too long.
Cause: The format value must be less than or equal to 64 characters.
Action: Re-enter the format value.

70051: Environment variable is too long.
Cause: The environment variable must be less than or equal to 64 characters.
Action: Choose a new environment variable name.

70052: Not yet implemented.
Cause: This function has yet to be implemented.
Action: This function will be supported in the next version.

70053: Invalid expression.
Cause: Invalid expression.
Action: Refer to “SQL Reference Guide” to verify the validity of the expression.

70054: Pattern ‘%1$s’ was not found.
Cause: The pattern does not exist in the current line.
Action: Check if parts of the current line correspond to the pattern.

70055: Invalid column ‘%1$s’.
Cause: Invalid column name.
Action: Verify that the column exists.

70056: Type constraint is out of range.
Cause: Type constraint is out of range.
Action: Refer to “SQL Reference Guide” to check the conditions for defining a type.

70057: Column ‘%1$s’ does not fit on the line.
Cause: The column is too long to fit on the line.
Action: Lengthen the line or shorten the column.

70058: Invalid use of DESCRIBE command.
Cause: A DESCRIBE command cannot be used for a sequence.
Action: Use another command.

70059: Invalid option ‘%1$s’.
Cause: Invalid option.
Action: Specify a valid option.

70060: Failed to execute DESCRIBE [%1$d].
Cause: Failed to execute a DESCRIBE command.
Action: Check the error message.

70061: Failed to execute LS [%1$d].
Cause: Failed to call the list of objects.
Action: Check the error message.

70062: Failed to execute SHOW [%1$d].
Cause: Failed to execute a SHOW command.
Action: Check the error message.

70063: Failed to execute COUNT [%1$d].
Cause: Failed to execute a COUNT command.
Action: Check the error message.

70064: Substitution variable ‘%1$s’ was not found.
Cause: The substitution variable was not found.
Action: Declare a substitution variable first.

70065: Unterminated string.
Cause: The string is not terminated.
Action: Check that quotation marks are used correctly.

70066: Operation is not allowed.
Cause: The operation is not allowed.
Action: Check permissions.

70067: Environment variable ‘%1$s’ is empty.
Cause: An empty environment variable is used.
Action: Use an environment variable containing a value.

70068: Failed to fetch a bind variable by using the RETURNING clause.
Cause: Failed to fetch a bind variable by using the RETURNING clause.
Action: Check the error message.

70069: Too many rows returned for the RETURNING clause.
Cause: More than one row returned for the RETURNING clause.
Action: Use a SQL statement that returns a single row.

70070: Invalid escape value.
Cause: The escape value is invalid for a SET environment variable.
Action: Use a symbol with a length of 1 excluding character, numeric, and blank characters.

70071: Invalid cursor identifier of the variable ‘%1$s’.
Cause: Previously printed or invalid cursor identifier.
Action: Save the cursor identifier again.

70072: Variable name is too long.
Cause: The variable name must be less than or equal to 128 characters.
Action: Choose a new variable name.

70073: Integer value is out of range (%1$d..%2$d).
Cause: The integer value is out of range for a SET environment variable.
Action: Specify a number within the range.

70074: Cannot recognize the wallet file.
Cause: Input file name is incorrect or empty.
Action: Check the environment variable, and verify the file name is correct.

70075: Failed to generate a security key.
Cause: Failed to generate a security key.
Action: Contact the technical support team.

70076: Unable to display the plan: Failed to retrieve the SQL ID to select the plan.
Cause: Failed to retrieve the SQL ID of the last executed query in the current session.
Action: Execute the query again or contact the technical support team.

70077: The given value, ‘%1$s’, does not match the format, ‘%2$s’.
Cause: The entered value does not match the predefined format.
Action: Change the format or modify the entered value.

70078: Unable to display plan: failed to retrieve the SQL ID.
Cause: Failed to retrieve the SQL ID of the last executed query in the current session.
Action: Execute the query again or contact the technical support team.

70079: Invalid string value.
Cause: The length of the specified string in the SET command must be 1.
Action: Modify the length of the string.

70080: Invalid character value.
Cause: The specified character in the SET command cannot be alphanumeric or white-space.
Action: Modify the character value.

70081: Export format is too long.
Cause: The export format must be less than or equal to 16 characters.
Action: Modify the format value.

70082: The ‘%1$s’ command has been disabled.
Cause: The command has been disabled by the system administrator.
Action: Contact the system administrator.

70083: The file ‘%1$s’ already exists.
Cause: The specified file name already exists.
Action: Either overwrite or delete the existing file.

70084: Invalid variable name ‘%1$s’
Cause: The variable name must be alphanumeric and/or include underscores.
Action: Modify the variable name.

70085: The variable ‘%1$s’ is not a number.
Cause: The variable used in an EXIT command must be a number.
Action: Use a different number variable or change the existing value to a number.

70086: inconsistent datatypes : expected ‘%1$s’ got ‘%2$s’.
Cause: Failed to fetch a bind variable in RETURNING clause by inconsistent datatypes.
Action: Check the error message.

---

Tibero Error Message 80000~80999

80001: Syntax error occurred in command line.
Cause: A syntax error occurred in a parameter in the command line.
Action: Specify the parameter correctly.

80002: Syntax error occurred at control parameter.
Cause: A syntax error occurred in a control parameter.
Action: Specify the parameter correctly.

80003: Column end offset must be larger than the start offset at line %1$d in control parameter.
Cause: The start offset references a location after the end offset.
Action: Fix the start and end column offsets.

80004: Standard input stream failed.
Cause: Cannot read data entered in the standard input.
Action: Enter the correct information in the standard input.

80005: Column information is not specified.
Cause: Information about columns in the table is not specified.
Action: Specify column information.

80006: Character set not supported by Loader utility.
Cause: The specified character set is not supported in the Loader utility.
Action: Specify a character set supported by the Loader utility.

80007: Unable to initialize handle.
Cause: Cannot initialize the handle.
Action: Specify the handle correctly.

80008: Unable to open control file.
Cause: Cannot open the control file.
Action: Verify the control file exists at the specified path.

80009: Control file is too large.
Cause: The control file is too large.
Action: Ensure the controls file is less than 10KB.

80010: Unable to close control file.
Cause: Cannot close the control file.
Action: Verify the control file exists at the specified path.

80011: Unable to open data file.
Cause: Cannot open the data file.
Action: Verify the data file exists at the specified path.

80012: Unable to close data file.
Cause: Cannot close the data file.
Action: Verify the data file exists at the specified path.

80013: Unable to open log file.
Cause: Cannot open the log file.
Action: Verify the log file exists at the specified path.

80014: Unable to close log file.
Cause: Cannot close the log file.
Action: Verify the log file exists at the specified path.

80015: Unable to open error file.
Cause: Cannot open the error file.
Action: Verify the error file exists at the specified path.

80016: Unable to close error file.
Cause: Cannot close the error file.
Action: Verify the error file exists at the specified path.

80017: Unable to open binary data file.
Cause: Cannot open a binary data file.
Action: Verify the binary data file exists at the specified path.

80018: Unable to close binary data file.
Cause: Cannot close a binary data file.
Action: Verify the binary data file exists at the specified path.

80019: Unable to load binary data larger than raw column size.
Cause: The binary data file is too large.
Action: Use a large data type like BLOB or LONG RAW.

80020: Data file name required.
Cause: No data file name was specified.
Action: Specify a data file name.

80021: Table was not found.
Cause: The table does not exist.
Action: Check the table name.

80022: Table name required.
Cause: No table name was specified.
Action: Enter a table name in the control file.

80023: Invalid column name “%1$s”.
Cause: The column name is invalid.
Action: Verify that the column name exists in the table.

80024: Unsupported data type in Loader utility.
Cause: The data type is not supported by the Loader utility.
Action: Check the data type.

80025: Column data exceeds data buffer size.
Cause: The column data is larger than the buffer.
Action: Increase the buffer size.

80026: Data file indicator was not found.
Cause: Cannot find the data file at the specified location.
Action: Verify that the path of the data file is valid.

80027: Unable to locate first column in data file.
Cause: Cannot find the first column in the data file.
Action: Verify that the path of the data file is valid.

80028: Unable to close external LOB or LONG data file.
Cause: Cannot close a LONG or LOB file.
Action: Verify the path of the file is valid.

80029: Unable to copy data to stream buffer in direct path load.
Cause: Cannot copy data to the DPL stream buffer.
Action: Check the size and availability of the data.

80030: Datafile has fewer lines than the number specified to skip.
Cause: The data file is smaller than the number of lines to skip.
Action: Check the data file.

80031: Error occurred while reading data file.
Cause: An error occurred while reading a data file.
Action: Check the path and modification of the data file.

80032: Invalid enclosed string was used.
Cause: An invalid enclosed string was used.
Action: Use a valid enclosed string.

80033: Data file has more errors than the maximum allowed (default: 50).
Cause: The data file has more record errors than allowed.
Action: Modify the ERRORS parameter on the command line, or modify data.

80034: Failed to load DPL stream.
Cause: Cannot connect the DPL stream to server.
Action: Check the CLI error context.

80035: Field terminator was not found.
Cause: The field delimiter does not exist.
Action: Specify a field delimiter.

80036: Failed to fetch additional rows: End of file was reached.
Cause: Reached the end of the data file.
Action: Check the current offset of the data file.

80048: Unable to jump to specific offset in datafile.
Cause: Cannot find a particular offset of the data file.
Action: Verify that the data file in the specified path is valid.

80049: Failed to insert data to database system.
Cause: Cannot load the data to DB.
Action: Check the CLI error context.

80050: Failed to assign outfile.
Cause: The data type cannot be read from an external file.
Action: Data types that can be read from an external file are BLOB, CLOB, LONG, LONG RAW and BINARY.

80051: Failed to alter DPL INDEX creation method.
Cause: An error occurred while changing the method to create a DPL INDEX.
Action: Contact the system administrator.

80052: Failed to convert from Loader utility data type to database data type.
Cause: Cannot convert the specified Loader utility data type to DB server data type.
Action: Contact the system administrator.

80053: Some relatively positioned columns are not present in the record.
Cause: Some column values do not exist in the record.
Action: To bind the non-existing columns with NULL, use the TRAILING NULLCOLS option.

80054: Error occurred while writing data file.
Cause: Failed to write the data file.
Action: Verify the data file path are modifications are correct.

80055: Unable to copy data to the connection information buffer.
Cause: An attempt was made to copy data that is larger than the (MAXLENGTH: 62).
Action: Check the buffer length and data.

80056: Column buffer size must be larger than the difference between start offset and end offset.
Cause: The buffer size of the column is smaller than the start and end offset difference.
Action: Specify a larger buffer size, or set the location information database.

80057: LOB file field delimiter was not found.
Cause: The LOB file field delimiter does not exist.
Action: Specify a field delimiter.

80058: The LOB file field delimiter is the same as the field terminator.
Cause: The LOB file field delimiter must be different from the field terminator.
Action: Specify a different LOB file field delimiter.

80059: The LOB file field delimiter was not found in data file.
Cause: The LOB file field delimiter does not exist in the data file.
Action: Specify a field delimiter found in the data file.

80060: The LOB file delimiter is the same as the field terminator.
Cause: The LOB file delimiter must be different from the field terminator.
Action: Specify a different LOB file field delimiter.

80061: The LOB file delimiter was not found in data file.
Cause: The LOB file delimiter does not exist in the data file.
Action: Specify a delimiter found in the data file.

80062: Invalid date/time format.
Cause: Invalid date/time format.
Action: Use the format supported by the DBMS server.

80063: Bind parameter was not found.
Cause: The bind parameter name does not exist in the columns.
Action: Use a string found among the column names.

80064: Duplicate filename in Loader utility.
Cause: Among control file, Infile, badfile, and logfile, two or more files have the same name.
Action: Check the file names and rename the duplicate(s).

80065: NOT NULL constraint violated.
Cause: An attempt was made to insert the NULL value into a column where the NOT NULL constraint is specified.
Action: Remove the NOT NULL constraint, or insert a value that is not NULL.

80066: Not yet implemented.
Cause: This function has not been implemented.
Action: This function will be supported in the next version.

80067: Cannot recognize the wallet file.
Cause: Input file name is incorrect or empty.
Action: Check the environment variable or input the file correctly.

80068: Unknown SQL function or function parameter.
Cause: Check SQL function or function parameter.
Action: Check SQL function or function parameter.

80069: Data save error in direct path loading mode.
Cause: Check bad file and log file.
Action: Check bad file and log file.

80070: Too many table names exist.
Cause: Set specific table names.
Action: Verify more than one SYNONYM are binded to different tables.

80071: Unable to use column with expression in DPL mode (DIRECT=Y).
Cause: This function is not supported.
Action: Use column with expression in CPL mode (DIRECT=N).

80072: DIRECT=Y option should be specified when DPL_LOG=Y or DPL_PARALLEL=Y.
Cause: If DPL_LOG=Y or DPL_PARALLEL=Y, DIRECT=Y should be also specified.
Action: Specify the DIRECT=Y option.

80073: Filename is too long.
Cause: The file name must be less than or equal to 256 characters.
Action: Choose a new filename.

80074: Invalid column index.
Cause: The column index is out of range.
Action: The column index must be greater than 0 and less than or equal to the number of columns.

80075: Unable to open %1$s file: %2$s.
Cause: Cannot open the %1$s file.
Action: Verify the %1$s file exists at the specified path.

80077: DIRECT=Y option should be specified when DPL_LOG=Y or PARALLEL>1.
Cause: If DPL_LOG=Y or PARALLEL>1, DIRECT=Y should be also specified.
Action: Specify the DIRECT=Y option.

80078: The environment variable ‘%1$s’ cannot be used.
Cause: The environment variable ‘%1$s’ cannot be used with the PARALLEL parameter.
Action: Delete the environment variable.

80079: I/O connect error.
Cause: An error occurred during communication with Proxy Server.
Action: Contact the technical support team.

80080: I/O listen error.
Cause: An error occurred during communication with Proxy Client.
Action: Contact the technical support team.

80081: I/O accept error.
Cause: An error occurred during communication with Proxy Client.
Action: Contact the technical support team.

80082: I/O read error.
Cause: An error occurred during communication.
Action: Contact the technical support team.

80083: Invalid nls_date_language.
Cause: Invalid nls_date_language.
Action: Use the nls_date_language supported by the DBMS server.

80084: Parallel and fast build indexes options cannot be used simultaneously.
Cause: Parallel and fast build indexes options cannot be used simultaneously.
Action: Use only one option between ‘parallel’ and ‘fast build indexes’.

80085: Missing byteorder option in control file.
Cause: Missing byteorder option in control file.
Action: Write ‘BYTEORDER (LITTLE/BIG) ENDIAN’ phrase in control file.